Cement silo roof dust collectors are now used in cement plants and mixing plants. This product often has some faults. How to troubleshoot the silo roof dust collectors, we must master some of the usual faults and troubleshooting methods. Cement tank top dust collector is an environmentally friendly dust removal equipment widely used in chemical plants, building materials factories, and mining and metallurgical plants. Many people are curious about the original work of cement tank top dust collectors, so how does it work? What about?

In fact, the working principle of the dust collector on the top of the cement tank is very simple. It is to absorb dust through a filter element and a filter, and then clean air after filtration, reducing air pollution.

The indicator light of the dust collector on the top of the warehouse does not light up, and the door cannot be started:

1. Check the power supply

2. Check the fuse inside the machine

3. Check the control cable

4. Check the motor and starting capacitor

5 Check whether the P5 socket in the machine is in good contact

6. The nose clutch is not disengaged

Door movement cannot be limited:

1. Check whether the reed switch or magnet is normal

2. Dust collector on the top of the warehouse.

The silo roof dust collector rotates in which direction it is lighter. Therefore, the switch direction of the silo roof dust collector cannot be fixed. This fault is caused by the lack of items. The missing items of the motor are restored to normal and the fault is eliminated. The above two failures are relatively common, so everyone must keep these treatment methods in mind, and be prepared!